23 results
30
- 10
- 15
- 20
- 25
- 30
- 50
Alphabetically, A-Z
- Featured
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
Sort
Sort by:
- Featured
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
-
More sizes availableVendor: Blichmann EngineeringBlichmann industrial grade brewing gloves are standard issue in commercial breweries! Reduce risk of burns and scalds Keeps harmful sanitizers, acids, and caustic chemicals from your skin Since they can be effectively sanitized, they are a great way to keep sanitized equipment sanitized! Elbow...
- $14.00
-
- $14.00
- Unit price
- / per
-
Vendor: High Gravity FermentationsThis 304 stainless steel valve has 1" / 1.5" TC flanges on both ends The bore is exactly 1-3/8". The valve can be locked into several positions at various degrees of "open". To unlock the handle to turn the valve, the trigger is squeezed....
- $69.99
-
- $69.99
- Unit price
- / per
-
Vendor: High Gravity FermentationsTwist Lock extension cord. 10 Gauge, 3 conductor SO Cord. 6ft. NEMA L6-30 plug to NEMA L6-30 receptacle
- $59.95
-
- $59.95
- Unit price
- / per
-
Vendor: High Gravity FermentationsThis is a replacement clear silicone gasket for any female camlock coupling. It comes standard inside the Cam B, C, Big C, D, and DC. You don't have to buy them separately unless you need a replacement or spares. Material: Silicone
- $1.69
-
- $1.69
- Unit price
- / per
-
Vendor: High Gravity Fermentations1.5" Tri-Clamp Silicone Gasket is used between fittings for a high temperature seal. Handles a wide range of temperatures from -58°F to 400°F. Material: Silicone Dimensions: 1.5" Fitting
- $2.50
-
- $2.50
- Unit price
- / per
-
Vendor: High Gravity FermentationsFor plugging holes that have been drilled for heating elements.
- $5.95
-
- $5.95
- Unit price
- / per
-
Vendor: High Gravity FermentationsSS nut and silicone o-ring for heating element. A machined stainless steel nut, and high-temperature silcone o-ring kit to facilitate weldless installation of an electric heating element in just about any kettle, or vessel. Note: The weldless heating element kit does not include the...
- $19.95
-
- $19.95
- Unit price
- / per
-
Vendor: High Gravity FermentationsReplacement silicone o-ring for heating element. Type O-Ring O-Ring Type Standard Cross Section Shape Round Width 3/16" Actual Width .210" Inside Diameter 1-1/4" Actual Inside Diameter 1.225" Outside Diameter 1-5/8" Actual Outside Diameter 1.645" Material Silicone Silicone Type Standard, FDA Compliant Durometer Hard Durometer...
- $2.45
-
- $2.45
- Unit price
- / per
-
Vendor: Blichmann EngineeringNew to the Blichmann Engineering lineup is the patent pending HopBlocker boil kettle filtration system! Over a year of brutal but tasty research yielded a filtration system that has up to 95% efficiency and is virtually impervious to plugging! Blichmann tested the HopBlocker with...
- $59.99
-
- $59.99
- Unit price
- / per
-
Vendor: High Gravity FermentationsThis heavy duty multi-purpose all-stainless screen screws into the Kettle Valve to provide you with a heavy duty stainless steel screen for mashing and boiling. Made from 304 stainless, 16 mesh size to prevent grain husks and whole hops from entering your valve. Great as...
- $12.95
-
- $12.95
- Unit price
- / per
-
Vendor: High Gravity FermentationsThis is the circular pattern spray nozzle that we use to construct the vessel input through the lid of a BIAB system. Includes: SS coupler, close pipe nipple, washer, nut, (all 1/2 inch NPT SS), two silicone o-rings, and sprinkler head. Drill 7/8 inch...
- $19.95
-
- $19.95
- Unit price
- / per
-
Vendor: High Gravity FermentationsSilicone o-rings. ID: 13/16 in., OD: 15/16 in. Perfect for weld-less connections using 1/2 inch pipe and fittings.
- $3.95
-
- $3.95
- Unit price
- / per
-
Vendor: Spike BrewingThis 1.5" TC butterfly valve can be used on Spike+ kettles. This valve has a squeeze locking/trigger handle that allows for 180 degrees of motion and 13 locking positions. The handle is a special 'shorty' style which keeps a compact design. This handle is made...
- $60.00
-
- $60.00
- Unit price
- / per
-
Vendor: Spike BrewingSpike's conicals come equipped with this 100% sanitary 2.0” TC butterfly valve. This valve has a squeeze locking/trigger handle that allows for 180 degrees of motion and 13 locking positions. The butterfly valve is the preferred valve for the cold side of brewing instead...
- $70.00
-
- $70.00
- Unit price
- / per
-
Vendor: High Gravity FermentationsCable assembly with quick disconnects on both ends. Has XLR style plug for use with EBC-SV and EBC III. This is the old style for pre-2014 models.
- $39.95
-
- $39.95
- Unit price
- / per
-
Vendor: High Gravity FermentationsTemperature probe. Compatible with all of our controllers that come with a probe. Installs in 9/16 inch hole directly in vessel. PT100 RTD liquid tight temperature sensor with weldless kit. The probe body is made of stainless steel. The mounting is 1/2" NPT thread....
- $49.95
-
- $49.95
- Unit price
- / per
-
Vendor: High Gravity FermentationsTemperature probe with weldless kit. Compatible with all of our controllers that come with a probe. Installs in 9/16 inch hole directly in vessel. PT100 RTD liquid tight temperature sensor with weldless kit. The probe body is made of stainless steel. The mounting is...
- $49.95
-
- $49.95
- Unit price
- / per
-
Vendor: Spike BrewingAnother Spike innovation that solves two issues. The obvious benefit from insulated lines is increasing your cooling efficiency from your glycol lines. The other benefit is the elimination of line 'sweating'. No more pools of water on your floor during those hot Summer days!...
- $30.00
-
- $30.00
- Unit price
- / per
-
Vendor: High Gravity FermentationsThis stainless steel valve with stainless steel bulkhead fits the 7/8" hole in most coolers when you remove the original plastic spigot. The interior stainless steel bulkhead projects 1½" into the cooler, and features ½" female pipe threads, perfect for a Bazooka Screen. Three...
- $39.95
-
- $39.95
- Unit price
- / per
-
Vendor: High Gravity FermentationsThis stainless steel valve with stainless steel bulkhead fits the 7/8" hole in most coolers when you remove the original plastic spigot. The interior stainless steel bulkhead projects 1½" into the cooler, and features ½" female pipe threads, perfect for a Bazooka Screen. Includes...
- $42.95
-
- $42.95
- Unit price
- / per
-
Vendor: High Gravity FermentationsThis stainless steel valve with stainless steel bulkhead fits a 7/8" hole you drill with a metal rated hole-saw or step-drill bit. These weld-less fittings feature nuts that have machined O ring containment grooves for the included high temperature silicone washer, so it will...
- $37.95
-
- $37.95
- Unit price
- / per
-
Vendor: High Gravity FermentationsThis stainless steel valve with stainless steel bulkhead fits a 7/8" hole you drill with a metal rated hole-saw or step-drill bit. These weld-less fittings feature nuts that have machined O ring containment grooves for the included high temperature silicone washer, so it will...
- $41.95
-
- $41.95
- Unit price
- / per
-
Vendor: High Gravity FermentationsThis is a replacement washer for New Style Weldless Kits. All Stainless Steel. 1.5" OD x 1.0" ID x 0.1" Thick
- $0.99
-
- $0.99
- Unit price
- / per