Let us build a controller for you, drill all of the holes, and put together a kit that you can assemble in an hour or so.
Choose 10 gallon vessels to brew 5 - 7 gal batches. 15 gallon vessels to brew 5 - 10 gallons of beer.
Build a high-performance one-barrel system with 55 gallon Boilermakers, two elements per vessel and the Wort Hog EBC-350.
Click on Select Options below to put together a complete system, or just the pieces that you need.
Most popular options are set by default:Average heating times:
Single 5500W heating element
Gallons 15 30
deg/hr 200 100
Two 5500W heating elements
Gallons 30 60
deg/hr 200 100
Looking at these tables we see that a single 5500W heating element can raise the temperature of a full 15 gallons an average of 200 degrees per hour. Starting with 55 degrees F, you can raise the temperature of the hot liquor tank to 170 in about 35 minutes. This is also typical of 30 gallons with two heating elements.
The Blichmann TopTier Modular Brewing Stand will accommodate vessels up to 20 gallons for electric systems using shelves. Larger vessels will need to be placed on something else, and are usually located on the same level with two pumps.
Choose a controller and add the HERMS package:
The Wort Hog EBC-130 is designed for a single vessel BIAB system, but can be used to operate a 3-V system. The probe can go in the mash tun, and the HLT temp would be dependent upon the mash temp, or vice versa. Kettle and HLT share the same heat outlet.
The EBC-330 controls the HLT and mash temperatures independently of each other. This lets you operate in different ways. Kettle and HLT share the same heat outlet.
The EBC-350 runs two heating elements independently and two pumps.
We have the best guarantee in the business. We will take care of any problem with the controller as long as you own it. We will even cover the cost of returning it during the first year (contiguous US).
To learn more about electric brewing, click here
Careless operation can result in serious injury or death. This equipment is sold as an experimental kit, to be assembled by the user. It is not a UL approved consumer electronic device.
High Gravity assumes no responsibility for any damages caused by operation of this system.
Please note that these are custom built at the time of ordering. Delivery may take up to 15 business days. OVERNIGHT SHIPPING IS NOT AVAILABLE.