Brew Kettles │ Spike

Spike kettles feature front to back handles, a rolled top lip and rivet-less handles They are also now NSF listed.

(Valve and thermometer sold separately.)
Weight: 0 lbs
Narrow Your Search: Brew Kettles
Manufacturer: Spike Brewing
Price: $0.00
  • Capacity:
  • Couplers:
Related items you may be interested in:
Check the check boxes next to the additional products that you would like to add to the shopping cart, then click on the "Add to Cart" button above. A check box is not shown if a product requires that you select an option or fill out a field. () indicates a required accessory.


Along with the high quality welding comes a lifetime leak free design. Simply apply plumbers tape, hand screw onto your tank and use a wrench to turn a little past hand tight; that’s it. Ditch weld-less fittings that are clumsy to install and have o-rings which will leak and fail at some point. Weld-less designs are a cheaper, inferior connection that you will not find anywhere on the professional scale.

Stepped Bottom - Boil Kettle

Spike's stepped bottom design creates an upper and lower shelf. This lower shelf creates a dead zone the hops will collect in. This is especially beneficial when paired with a whirlpool (either manual or using a pump) before draining. The top step allows a place for the side pickup tube to rest above the settled hop material. This results in crystal clear wort being transferred to your fermentation vessel.

Stepped Bottom - Mash Tun

The stepped bottom also functions as a shelf for the false bottom to seal against. The stainless on stainless seal means there is no need for rubber gaskets in your grain bed. The design also seals better as more grain is added. The additional weight creates a better sealing force. This is opposed to other designs that start to flex or crush under heavy grain bills. The bottom perforated ring helps supports the grain weight while also filtering the wort again before it reaches the pickup tube. All this this creates an ultra-low dead space which allows us to boast industry leading efficiencies.


All of the Spike tanks are designed to play multiple roles. You can use them as a Hot Liquor Tank, Mash Tun or Boil Kettle (did someone say BIAB!?). As you develop as a brewer you can re-commission one of your older tanks to a new use. Viola, old small BK is now a HLT! No uni-taskers here! Why design a uni-tasker when you can design something that can be used for multiple uses!?

NSF Listed

For the v4 kettle Spike made the decision to invest both a lot of time and capital to have our product and facility NSF listed. The NSF (National Sanitation Foundation) mark is your assurance that their product has been tested by one of the most respected independent certification organizations in the world. NSF conducts periodic unannounced inspections and product testing to verify that our product continues to comply with their high standards. With more and more of Spike's customers using their equipment for commercial use it’s becoming more and more crucial to have the NSF listing as many commercial applications may require NSF listed products.


Why engineer when you can over engineer? Spike kettles are the thickest on the market.

Front to Back Handles

Another small design change that might go unappreciated until explained. One reason to rotate the handles is that it reduces the width needed for a 3-vessel single tier system by nearly 12”. With side mounted handles the kettles need additional spacing, so the handles do not touch. You also need additional room if you plan to hang the lid on the handles when not in use (yes, Spike kettles have a built-in lid holder). With this design the lid hangs off the back and out of the way while saving you 12” of space in your brewery. Another benefit is when carrying the kettle around you won’t be banging your knees against the welded couplers.

Rolled Top Lip

Spike learned a lot working with the NSF team when redesigning their kettle line. One thing they brought up was the completely rolled lip design of most kettles out there. When the lip is completely rolled onto itself it creates a pocket where gunk and liquid can get in but has a hard time getting out. It is also almost impossible to clean. What they recommended was using a partially rolled lip design that does’t trap gunk and can easily be cleaned.

Tri-Clad Bottom

When using with direct fire or induction the tri-clad bottom helps evenly distribute the heat along the entire bottom. Using 400 tons of force, 2 layers of stainless steel are bonded to an aluminum core. Along with the even heating it also prevents scorching like you are more prone to get with a single layer kettle.

Rivet-less Handle Design

Rivets that hold handles on always needed a little more cleaning attention so Spike used the same sanitary techniques used on their conicals to attach the handles to the brew kettles. By sanitary welding the handles on (opposed to riveting them on) not only are they stronger but there is no place for bacteria or gunk to build up.


Spike's talented craftsmen does all the welding at their facility in Milwaukee.
Product Reviews
Rate this product: