Temperature Controller - Digital Ranco - Wired

Use this digital unit to control the temperatures of your hot liquor tank and mash tun.  Your electrical device plugs into this unit which plugs into the outlet.  If the temperature lowers below your set point, the device is turned on. 

 

Also can be used to control the temp of a refrigerator, freezer, or air conditioner.

Pre-wired for 110VAC with 3-Prong cord, Input and Output 4 ft. each.

The Ranco ETC is a microprocessor based electronic temperature controller designed to provide on/off control of heating and cooling (Chillers) . The ETC is equiped with a Liquid Crystal Display(LCD) that provides a constant readout of the sensed temperature, and a touch keypad that allows the user to easily and accurately select the set point temperature, differential set point, and heating or cooling mode of operation. The unit can be operated on either line voltage, 120/208/240VAC.

 

Some of ETC's outstanding features include:

SPECIFICATION	ETC-111000
SETPOINT TEMPERATURE RANGE	-30°:F to 220°:F
DIFFERENTIAL ADJUSTMENT	1°:F to 30°:F
INPUT VOLTAGE	120 or 208/240 VAC, 50/60Hz
RELAY	SPDT 120VAC, FULL LOAD 16A, 1 HP 208/240VAC, FULL LOAD 8A, 1 HP
SENSOR	Thermistor, 2" long x 0.25" diameter with 8ft. cable
ENCLOSURE	NEMA 1, Plastic
ENVIRONMENT	-20 to 140°F; RH 0-95%
DIMENSIONS	175 x 41 x 23mm (7.9 x 1.8 x 1")