Regulator - Dual Gauge

A sturdy, well-built regulator. Comes with a built-in gasket where the regulator connects to the CO2 tank, eliminating the constant replacement of fiber washers. Also comes with a built-in shut-off valve, a pressure relief safety valve, and our favorite feature – a back flow preventing check valve that saves your regulator from the backflow of beer. Regulators work best at room temperature. If you must use your regulator in the cold it will take up to 4 hours for the adjustment to register. For example: If you are at 10 PSI and you change the pressure to 12 PSI the regulator will move to 14 or 15 PSI over the next 4 hours. Once you have found the correct pressure the regulator will work perfectly fine but it will take some trial and error to get it adjusted.